MTM2.com

A forum for mtm2 discussion
FAQ :: Search :: Members :: Groups :: Register
Login
It is currently Thu Mar 28, 2024 3:37 am



Post new topic Reply to topic  [ 18 posts ] 
Author Message
 Post subject: Yet another new error message
PostPosted: Thu Feb 06, 2003 3:46 pm 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
I've been re-acquainting myself with truck painting and have a problem. (actually I have a few problems but I won't go into that)<font size=+2 face=Wingdings>J</font>
I repainted the stock Boogey van and kept getting an invalid texture size message when trying to run the new truck in the game - I managed to work out that when saving as a bitmap from PSP (before using FlyRawGui to convert to Raw) I didn't have the Save As/Options/RGB checkbox checked so I was ending up with a weird sized Raw. Now that that problem is fixed I am getting this message:
<IMG SRC="http://home.attbi.com/~emceemart/MTM2/errormc1.gif" border=0>
The new van doesn't show up in the garage but everything seems to be loading OK until the load screen states "loading additional graphics" ...then the above message appears. I've remade the Pod (several times) and remounted it above (and below) the Truck2.pod. The only differences between the original Boogey.trk file and my truck.trk file are the textures and models names. Any ideas?

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 06, 2003 6:16 pm 
Member
User avatar

Joined: Wed Nov 06, 2002 2:01 pm
Posts: 881
Location: Silicon Valley, California. USA
I can't tell from here, but if you want to send me a zipped copy of the truck POD, I could look into it. I'm usually successful at debugging trucks.

ZOtm_BigDOGGe@yahoo.com

------------------
- BigDOGGe's Boneyard ...The Best Custom Trucks in MTM2 -


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 06, 2003 10:35 pm 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
Thanks BigDOGGe, it's on the way.

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 06, 2003 10:59 pm 
Glow Ball
User avatar

Joined: Tue Feb 02, 1999 7:00 pm
Posts: 19
Curious. What did you use to replace the texture. You're absolutely right this looks like a texture error, but the bad type message hints at something more. What happens if you call the bin into binedit and reset all the face types?

<small>thanks for the graphic (now I just have to update the page)</small>


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 2:42 am 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
Quote:
What did you use to replace the texture.


Well I thought I could get away with opening the Bin in Editpad and rename the texture in that but obviously not so. After using MDMRE's texture replacer I assume the texture name occurs more than once in each Bin. I also got myself confused by using all 3 Bins where I should probably only bother with the high detail one at this early re-learning stage. Apart from that I realise now that I made a fundemental mistake - I completely forgot to allow for the wheel wells...Image! So I'm starting from scratch (don't bother to spend any time on it BigDOGGE).

Quote:
What happens if you call the bin into binedit and reset all the face types?


I got an "unsupported face type" error message and my computer crashed! The curious thing is when I loaded a simple Bin (a cube) and mapped all 6 faces to my texture there was no error. I am making some progress however. Hopefully I'll have something to show for it by the time the weekend is over.

edit. Has anyone had any success exporting an SMF from Zmodeler as a Bin? Whenever I've tried it in the past I get the "unsupported face type" error when attempting to open the Bin in BinEdit.

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>

<font size=1>Edited by EmceeMart (07-02-2003)</font>


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 6:00 am 
Member
User avatar

Joined: Wed Nov 06, 2002 2:01 pm
Posts: 881
Location: Silicon Valley, California. USA
It would seem that the BIN was 'damaged" in some way,as I also get an unsupported face-type mesage when I try to view the model in Binedit.

I can tell you that your textures are fine I was able to succesfully aply them to a fresh copy of the Boogeyvan BIN. I'll be sending it to you shortly.

Somewhere along the way, the face type was changed. I can't say where...

P.S.....nice paint!

------------------
- BigDOGGe's Boneyard ...The Best Custom Trucks in MTM2 -


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 6:39 am 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
Success!
<IMG SRC="http://home.attbi.com/~emceemart/MTM2/goldm.jpg" border=0>
The paint still needs a little work but at least it works. Still can't figure out what went wrong first time around though. I'll be intersted to see what you did with the Boogey Van BigD - thanks.

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 12:58 pm 
easy company
User avatar

Joined: Tue Feb 29, 2000 2:01 pm
Posts: 2036
nice truck MC :o)

i don't see many movies or much tv anymore but i did happen to see that movie for the first time just last night... the scene behind the curtain with mini me and austin made me laugh so hard my face hurt... very melbrookssish and a fun flick.

------------------
if you think bigger is always better try to remember the last time you had a toothache.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 2:21 pm 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
Quote:
nice truck MC Image)


Thanks for the compliment Mal, I've never been accused of being a truck maker/painter, I only ever released one repaint for MTM2 back in the day. Though since then I have done a few repaints for Leo's MTM Pro trucks for Evo2 which turned out pretty well. I think Leo used BigDOGGe's original models. Compared to the stuff you guys are coming out with these days my repaint looks pretty amatuerish IMO! I'm hoping I can develop the Goldmember theme for the Expo - maybe include a truck or 2 with the track. As far as the movie, I haven't seen it yet, just the trailers. I've seen the first 2 and I like Mike Myers' sense of humor - very Pythonesque and as you mention Brookish Image
On the theme angle, I reckon the track will have all kinds of references to "Sponsored by the British Dental Association" heehee.

Edit. Got your zip thnx BigDOGGE - love the wavs! Shagadelic! Image

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>

<font size=1>Edited by EmceeMart (08-02-2003)</font>


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 07, 2003 10:33 pm 
Member
User avatar

Joined: Sat Feb 26, 2000 2:01 pm
Posts: 0
> Has anyone had any success exporting an SMF from Zmodeler as a Bin?

I should think <a href=http://rhinoseros.com/~malibu350/scraps/Buildings.htm>Mal has</a>...

> Success!

...and you. Groovy paintjob, hehe. On a whim I went through the sound pod looking for Army saying something like "yeah, baby", but no luck. ;-)

> MDMRE's texture replacer

There is an alternative, which I'll never fail to mention: <a href=http://rhinoseros.com/~forum/pages/Forum16/HTML/000046.html>hehe</a>


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 1:49 am 
easy company
User avatar

Joined: Tue Feb 29, 2000 2:01 pm
Posts: 2036
> Has anyone had any success exporting an SMF from Zmodeler as a Bin?

oops i missed that question... i've converted close to 800 models from evo 1 and 2 and even a few from "that other racing game" with 100% success... let me know if i can be of any help

------------------
if you think bigger is always better try to remember the last time you had a toothache.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 11:07 am 
Member
User avatar

Joined: Wed Nov 06, 2002 2:01 pm
Posts: 881
Location: Silicon Valley, California. USA
...and most of the bodys at my scrapyard are evo SMF-->BIN conversions.

Make sure the texture loads into Zmodeler with the SMF model. If you try and export the bare model with no textures, BINedit won't accept it.

Haggy used to send me models with that error as well. I never found what cause his "different face type" errors.

-----------------------------------

I still may be able to get you the GOLDMEMBER wav. No promises. I found an e-card flash with Myers as doctor evil saying "goldmember". it would be perfect for your truck.

If I hook my 2 comps together with an audio patchcord, I can record the audio from a flash(SWF) file. I'll have to go buy the cord though (1/8" 3-conductor male to 1/8" 3-conductor male).

Anyone know an easier way to remove the audio from a flash? All I have is SWISH, not the original FLASH proggy.

If anyone wants to give it a try, here's the flash (120k)

http://mtm2.com/~bigdogge/download/e-card1.swf

------------------
- BigDOGGe's Boneyard ...The Best Custom Trucks in MTM2 -


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 2:18 pm 
Member
User avatar

Joined: Fri May 04, 2001 2:01 pm
Posts: 495
Location: Bathurst, NSW, Australia
>> Anyone know an easier way

Yup.

http://mtm2.com/~d2s/temp/goldmember2.wav

My Creative Sound Blaster Audigy card came with a suite of nifty programs. I can record sound on-the-fly from any source on my PC (even another program playing sound), and then edit it as I please.

Sorry, the file's a bit big (~800KB for just a few seconds of audio) but I didn't want to crop out too much or reduce the quality on you. If you need anything else, let me know Image

------------------
Please use the brake provided and not the vehicle in front of you.
- V8 Challenge online racing guidelines

<font size=1>Edited by Drive2Survive (09-02-2003)</font>


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 2:40 pm 
Member
User avatar

Joined: Sat May 11, 2002 2:01 pm
Posts: 247
Location: surrey, bc, canada
>> Anyone know an easier way

>>Yup.

so do i. Image

gold1.wav

i just use a patch cord from line out to line in and can record anything <font size=+2 face=Wingdings>J</font>
and then use the windows recorder to edit it.

------------------
HEY BUDDY, the gas is on the right!

<font size=1>Edited by legwon (09-02-2003)</font>


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 3:13 pm 
Member
User avatar

Joined: Wed Nov 06, 2002 2:01 pm
Posts: 881
Location: Silicon Valley, California. USA
That's not an easier way, Legwon.....that's similar to what I suggested....

Quote:
If I hook my 2 comps together with an audio patchcord, I can record the audio from a flash(SWF) file. I'll have to go buy the cord though (1/8" 3-conductor male to 1/8" 3-conductor male).



The difference is that you are doing it on one comp, while I use 2 PC's nearly sitting next to each other, which is just as easy. The output of the one playing the audio goes to the input on the other. I didn't go output to input on one computer because it's easy to get a feedback loop, but I guess your system was not vunerable to this problem.

But I do appreciate you doing so anyway....I never made it to the store today to buy a patchcord myself....now I can save $3.99 (here I come McDonalds!) lmao! I'll need to get one eventually, unless I can find a program like D2S mentioned.

Thanks Legwon and D2S!
------------------
- BigDOGGe's Boneyard ...The Best Custom Trucks in MTM2 -


<font size=1>Edited by ZOtm_BigDOGGe (09-02-2003)</font>


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 5:04 pm 
Member
User avatar

Joined: Wed Nov 06, 2002 2:01 pm
Posts: 881
Location: Silicon Valley, California. USA
OK, EmceeMart. Here's the Goldmember WAV, all processed, edited, and ready for MTM2 trucks. I've no way to remove the background music from the voice, but I don't think anyone will care.

I recommend you place it in your MTM2/SOUND folder , and replace one of the listed WAVs in the TRK file with it, leaving the other 2 ("oh behave" & "yea baby"). That will make a cool combination.

http://mtm2.com/~bigdogge/download/goldmemb.wav

------------------
- BigDOGGe's Boneyard ...The Best Custom Trucks in MTM2 -


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 08, 2003 7:24 pm 
Member
User avatar

Joined: Sat May 11, 2002 2:01 pm
Posts: 247
Location: surrey, bc, canada
>>But I do appreciate you doing so anyway....I never made it to the store today to buy a patchcord myself

hey np. ive been meaning to hook mine up (just in case i needed it for something) for the last month. lol.
just never got around to it or had a reason to do so.

------------------
HEY BUDDY, the gas is on the right!


Top
 Profile  
 
 Post subject:
PostPosted: Sun Feb 09, 2003 12:46 am 
Member
User avatar

Joined: Wed Mar 01, 2000 2:01 pm
Posts: 747
Location: Salem, OR, USA
Quote:
OK, EmceeMart. Here's the Goldmember WAV


Thanks bud Image

And thanks everyone for taking an interest.

------------------
<IMG SRC="http://home.attbi.com/~emceemart/pics/mcsig.gif" border=0>


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group